Skip to search boxSkip to navigationSkip to main content

Surface modification of Co-Cr-Mo implant alloy by laser interference lithography

  • Xiaofeng Wei
    ,
  • Wenjun Li
    ,
  • Bojian Liang
    ,
  • Binglin Li
    ,
  • Jinjin Zhang
    ,
  • Linshuai Zhang
  • Changchun University of Science and Technology
    ,
  • Jilin University
Research Output:
Contribution to journal
Article
 Peer-review

Abstract

This article studies the feasibility of using laser interference lithography (LIL) for surface modification of Co-Cr-Mo implant alloy which has been universally applied to joint materials in total joint replacements. The tribological performances and surface topography of the samples were studied by RTEC micro-friction and wear tester and scanning electron microscope (SEM). Hardness testing of the modified sample surfaces was carried out using the micro-hardness tester (MH-60). Experimental results indicate that the sample surface modified with laser interference lithography presents better tribological performances and hardness properties than those untreated materials, including a 64% friction coefficient reduction and 40% hardness enhancement, which is very promising to significantly reduce the mean revision rate of post primary total hip replacements in the future.

Publication Information

Output type

Research Output:
Contribution to journal
Article
 Peer-review

Original language

English

Pages from-to (Number of pages)

Pages 212-217

Journal (Volume, Issue Number)

Tribology International (Volume 97)

Publication milestones

  • Accepted/In press - 24/01/2016
  • Published - 04/02/2016

Publication status

Published - 04/02/2016

ISSN

0301-679X

Publication IDs

  • handle.net: 10547/624336
  • Scopus: 84957545650

Access to documents

Publication metrics